The connection of stainless steel elbow includes: butt-welding (the most common way), flanged connection, tri-clover, threaded and socket welding. And based on its production process, it can be divided into: welding elbow, stamping elbow, push elbow, casting elbow, forged elbow and so on. For some peoples, elbow is also known as bend pipe.
If you are looking for more details, kindly visit our website.
The materials of elbow we can offer include:
a). Generally, the main system of industrial pipelines is mainly connected through butt welding. To improve the welding quality, the end will be beveled to form an angle and edge based on standard requirements. ASME B16.25 Standard has specified for the beveled angle, and the allowable deviation and detection method. For stainless steel elbow, its surface quality and mechanical properties are basically the same as pipes. Due to the performance requirements and ease of welding, the materials of stainless-steel fittings are usually required to be of the same as the connected pipes.
b). All our butt-welded stainless steel pipe fittings including stainless steel elbow are treated with shot blasting and pickling passivation or sand-blasting, so that the surface of the pipe fittings will become clean, beautiful, and its corrosion resistance can be guaranteed. For those large pipe fittings which cannot be shot blasted, we usually use sand blasting to clean their surface. Besides, our factory also provides surface polishing or oscillating treatment to meet the requirements of different projects.
Trust Fluids are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
c). For stainless steel weld elbow, we will test their size and mechanical performance based on EN -4 / EN -3 and ASME B16.9. Our factory can also do other tests based on the requirements of our clients.
For those elbows or pipe fittings without special packing requirement, if their size is 2” or below, we usually seal with plastic and then put them into plywood case. However, for the elbows of large size, we normally pack with pallets and give a protection for the beveled end. As for the pallets number, it will depend on the actual size of elbow. Undoubtedly, we will also mark the details in the packing, not limited to the size, materials, trademark, etc. We can also do color labeling for products according to customer requirements, so that they can rapidly distinguish the materials when the products arrive.
90 Degree Elbow 1" Stainless Steel used to attach sections of tubing for rails, bimini and dodger frames, stanchions, solar panels and any other framing on a boat. This elbow fitting is made from Type 316 stainless steel for maximum corrosion resistance and durability. Secures with set screws.
If you want to learn more, please visit our website Stainless Steel 90° Elbow.