Crawler water well drilling rig is a professional and technical high-tech drilling machine. It combines the advantages of a variety of the same type of machinery to achieve the work needs of high efficiency, easy decomposition, light weight and easy transfer. With excellent quality, it has gone through several glorious years and used widely.
With competitive price and timely delivery, JK Drilling sincerely hope to be your supplier and partner.
Crawler water well drilling rig is a kind of drilling rig with oil pressure feed. It is suitable for census exploration, geophysical exploration, road and construction exploration, and water well drilling. Water well drilling rigs are mainly used for the development of groundwater resources, including domestic water, agricultural water and industrial water drilling. At the same time, small water well drilling rigs are also suitable for hydrogeological exploration, construction engineering, bridge foundation drilling, etc.
1. Multifunctional, air DTH and mud rotary .Using the principle of air DTH , drilling is fast and efficient. Using mud pump, suitable for soft formation .
2. Equipped with rubber steel wire tracks, it is easy to move and does not hurt the road surface when walking on urban roads.
3. Equipped with hydraulic high outriggers, it is easy to load and unload trucks, saves hoisting costs, and can be used for drilling rig leveling to maintain the stability of the fuselage.
4. Equipped with a high-power diesel engine with strong power to effectively meet the needs of work.
5. Configure the hydraulic landing composite drilling boom to save space and provide a strong lifting force for deep hole operations.
6. The drilling rig is equipped with a hydraulic feed system, a dual hydraulic pressure motor power head, a chain drive and hydraulic cylinder propulsion, with high torque and high drilling efficiency.
7. Equipped with a hydraulic wrench, the drill pipe can be quickly disassembled, saving time and effort.
8. The operation handle is centralized, the layout is reasonable, and it is safe and feasible.
If you are looking for more details, kindly visit Crawler Mounted Drilling Rigs.
9. Excellent workmanship, durable, and low maintenance costs in the later stage.
Crawler multi-function water well drilling rig is a new type, high-efficiency and multi-function hydraulic drilling rig:
When rock drilling, a DTH hammer is used to operate, and the efficiency of air slag discharge and ruler intake is dozens of times that of traditional rotary drilling.
The loose layer can be used for cutting or cone drilling operations, mud slag discharge, and is suitable for drilling under composite geological conditions.
The smaller fuselage is suitable for construction on a variety of sites. While solving the drinking water problem, it has provided more benefits to the well-drilling service industry.
A cpneumatic crawler drilling rig is a light-duty deep-hole drilling rig that uses compressed air as power and is equipped with a crawler walking structure. Pneumatic crawler drill is mainly composed of track assembly, chassis assembly, drive assembly, fuel tank assembly, control assembly, column assembly, main engine assembly, hose assembly and other parts. It has the advantages of 360 ° horizontal angle drilling and so on. Crawler pneumatic drilling rigs can drill holes for water discharge, gas drainage, pressure relief holes in the bottom plate, slit holes in the roof, geological exploration holes, and mine blast holes. It saves time and effort and works efficiently.
The drilling operation and walking of the crawler pneumatic drill rig are controlled by an independent console. For drilling operations, you must first stabilize the drilling rig and turn the start-stop button of the drilling rig console to the stop position, and then move the back-end ball valve on the pumping station to get the air source for the drilling rig's pneumatic console.
As one of our most popular types of drilling equipment, it is very convenient to use. There are two reversing valves on the console to control the rotation and advance as well as retreat of the drilling rig respectively. There is also a ball valve to control the amount of water in the punching process. The right control valve controls the rotation of the rig. Push it forward, the host will rotate forward; pull it backward, the host will reverse; and push it to the middle position, the host will stop. The left control valve controls the forward and backward of the gyrator. When pushing it forward, the gyrator advances; when pulling it backward, the gyrator retreats; and when pushing it to the middle position, the gyrator stops.
The pneumatic crawler drill can be used when connected to the high-pressure tuyere. No motor and no electricity is required, so there is no risk of explosion and the safety parameter is high. The pneumatic crawler drill can work across belts and scrapers. It is suitable for perforation and blasting in mines, earth and rock engineering, severe cold areas, extreme areas, and high-altitude areas. It can also be used to drill and guide detection holes in tunnels and mines.
Are you interested in learning more about DTH drill pipes? Contact us today to secure an expert consultation!