Grip Tape & Anti-Slip Tape - Ace Hardware

Bare steps, stairs and ramps can create a genuine danger of slipping and falling, especially when they're wet. Our anti-slip tape section includes the products you need to increase safety in any area where slips or slides could cause serious injury, whether it's in a public space or your own home.

With competitive price and timely delivery, Hebei Top Tape sincerely hope to be your supplier and partner.

What is Grip Tape?

Also known as anti-slip tape, grip tape is a durable, thick tape with strong adhesive on one side and a textured surface on the other. For heavy-duty outdoor use, an abrasive texture is created using grit of various sizes, which provides excellent slip prevention in all weather.

However, this kind of tread tape isn't suitable for areas where people often go barefoot, such as pool sides, boat decks or bathtub steps. For these uses, a gentler texture made of dimpled plastic is more comfortable, although it provides slightly less grip.

Waterproof Anti-Slip Tape for Outdoor Use

Outdoor steps and decks made from lumber can easily become slippery in the rain or if mildew is allowed to grow. When choosing anti-slip tape for outdoor use, make sure it's rated as both waterproof and mold- and mildew-resistant to ensure a long-lasting grip without slipperiness or staining.

The company is the world’s best Reflective Anti Slip Tape supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Safer Ladders with Adhesive Tread Tape

Adhesive tread tape can also be added to ladder rungs to provide greater grip and reduced risk of accidents. In this case, choose a tape with a high grip rating for maximum protection, but with a low profile to keep any tripping risk to a minimum. Also, look for tape with high durability and a strong backing adhesive to stand up to heavy use.

How to Install Anti-Slip Tape

For long-lasting safety, tread tape should be carefully installed using the following steps:  

1. Clean the stairs or ramp thoroughly using a suitable detergent to remove all grease and grime.
2. Rinse with a wet sponge and leave to dry completely.
3. Make sure that all surfaces have reached the minimum application temperature noted on the tread tape
4. Cut the tape to length and lay it down half an inch from the stair edge.
5. Peel away the first inch of backing and press the exposed tape into place.
6. Continue slowly peeling and pressing an inch at a time for the full length of the anti-slip tape, making sure there are no bubbles or wrinkles.
7. Once the full length is in place, use a rubber hand roller to apply the last bit of pressure and complete the seal.
8. Leave the adhesive to set for the recommended time before allowing access to the stairs.

Always make sure to double-check the manufacturer’s instructions for a full set of installation details.

Safer Steps and Stairs with Grip Tape from Ace

At Ace, we provide all the anti-slip solutions to increase safety in public areas or family spaces alike. Shop tread tape from brands like . Simply browse our range above and we'll get you the products you're looking for, shipped direct to your home or worksite.

If you are looking for more details, kindly visit Anti Slip Tape For Bathroom.