Direct to film printing, is a modern printing technology used in the textile industry. It involves printing onto a special kind of film that is then heat pressed onto the fabric, allowing for highly detailed and vibrant colored designs. The process usually involves four steps: Printing, Powdering, Drying, and Heat Pressing. This method allows for better quality over traditional methods and the ability to print on various kinds of materials. Today as a DTF printer manufacture, we are happy to provide some advice for someone who’s new to DTF printing:
Make sure you fully understand how to operate your DTF printer before using it. This includes knowing how to properly load the film, clear paper jams, and replace ink cartridges, among other things.
The film used in direct to film printing is very sensitive and should be handled with care. Avoid touching the printed side of the film as it can easily damage the printed design.
Correct Use of Ink:
Depending on your printer model, the correct amount and type of ink to be used will vary. Please make sure to read the user manual and follow the recommended settings.
The most crucial step inDTF pet film printing is the heat transfer process. The correctly adjusted heat and pressure are a must for the successful transfer of the image.
Experiment:
Every machine, every type of ink, every heat press and even the material on which you are printing, will make the print look different. So, be prepared for a little trial and error as you get used to your machine.
Remember, always follow the manufacturer’s guidelines when operating your equipment. It’s also a good idea to join online forums or communities where other DTF printing enthusiasts share their tips and tricks. You can learn much from their experiences!
We hope this helps, and you’re able to find success in your DTF printing journey! If you have any need for DTF Printer Machine and printing material pls feel free to contact us SUBLICOOL!
Want more information on 60cm DTF Printers? Click the link below to contact us.