Our first commonly used mica board is divided into muscovite mica board, model: HP-5, which is made of 501 type mica paper and organic silica gel water bonded, heated, and limited. The mica content is about 90%, and the water content of organic silica gel is 10%.
Goto Firsta to know more.
epoxy gasket. Phlogopite mica board, model: HP-8, is made of 503 type mica paper and organic silica gel water bonded, heated and limited, the mica content is about 90% of epoxy gasket, and the water content of organic silica gel is 10%.
Since the mica paper used is different from the epoxy gasket, its performance is also different from the epoxy gasket. The HP-5 muscovite board has a high temperature resistance of 600-800 degrees, and the HP-8 phlogopite board has a high temperature resistance of 800 degrees. Between - degrees, after a day and a night of limited molding by a hot press, it has high bending strength and excellent resistance. It can process various shapes without delamination by punching.
Consider the pros and cons of mica boards:
Contact us to discuss your requirements of china release liners. Our experienced sales team can help you identify the options that best suit your needs.
1: First, look at the flatness of the surface, there is no unevenness or scratches.
2: The side surface cannot be layered, the incision should be regular, and the right angle should be 90 degrees.
3: Asbestos-free, less smoke and less odor when heated, even smokeless and tasteless.
If you are looking for more details, kindly visit bopp metalized film.