Square Shoulder Mills for Advanced Cutting Materials

Seco offers a variety of square shoulder milling cutters for use with advanced cutting materials, allowing you to take advantage of these cutters’ benefits, such as higher cutting speeds. When applied correctly to appropriate applications, PCBN, PCD and ceramics provide unbeatable boosts for square shoulder milling productivity.

Goto Guangzhou Ruiyi Technology Co., Ltd. to know more.

Shoulder milling

Shoulder milling operations include:

• Shoulder/ face milling
• Edging peripheral milling
• Shoulder milling of thin deflecting walls

Shoulder / face milling

What is successful shoulder / face milling?

Shoulder milling generates two faces simultaneously, which requires peripheral milling in combination with face milling. For a finishing operation, achieving a true, ninety-degree shoulder is one of the most important requirements, other application like roughing operations can be made with close to 90 degrees solutions with high chip removal ratios Shoulder milling can be performed by traditional square shoulder cutters, and also by using end milling cutters, long edge cutters and side and face milling cutters. Due to these numerous options, it is essential to consider the operational requirements carefully in order to make an optimal choice.

Choice of tools

Shoulder milling cutters

Shoulder face mills of conventional designs are often capable of milling “true”, 90 degree shallow shoulders. Many shoulder face mills are universal cutters, and can be used advantageously for making holes, ramping or full slots on components. They offer a good alternative to face milling cutters when milling axially deflecting surfaces or for milling close to vertical faces.

End milling cutters

The indexable insert and solid carbide end mills offer good solutions for shoulders requiring accessibility or where quality surface is the top priority, repeatability between passes and true 90 degrees are the key features of these tools.

Long edge milling cutters

Long edge cutters are generally used for milling deeper shoulders, and contouring wide components in one shot, even using in conjunction with high power machines, will permit remove high chips volume in roughing operations that can be finished using the same long edge cutter or solid carbide tools.

How to apply

Milling of shallow shoulders

This frequently used operation is generally performed by shoulder face mills and end mills. A shallow cut allows for a larger radial cut. Often these cutters can replace face mills, particularly when the axial pressure on the component is a limitation, and when there is a demand for accessibility close to vertical faces or fixture sections. Oversized shoulder cutter options provide for optimal accessibility when milling shallow shoulders located deep.

Milling of deep shoulders

Use repeated passes with shoulder face mills and end mills. To minimize surface errors, such as scallops and transition-edges between the passes, a high precision cutter that is able to produce true 90º shoulders is an absolute requirement. If shoulder depth is smaller than 75% of the cutting edge length, the quality of the vertical surface does not normally require extra finishing.

Use a single pass with a long edge milling cutter

A long edge cutter is a good solution for deeper, larger and usually heavier shoulder milling applications. They have a high metal removal capacity, and are generally used for rough milling as the resulting surface texture is characterized by side milling at high feed rates.

These cutters make demands on:

• Stability
• Spindle condition
• Chip evacuation
• Tool holding
• Power

Radial forces are considerable making this a tough side milling application.

Shorter long edge cutters are suitable for:

• Radially large but shallow shoulders.
• Full slotting at a depth equal to the diameter, which can make up for machine limitations

Longer versions are intended for:

• Milling of shoulders with moderate radial depth.
• Edging in powerful, stable machines

Are you looking for tool recommendations?

Find our cutting tools here chevron_right

Need advice?

Ask us a question chevron_right

Want to learn more about the metal cutting basics?

Register for our free e-learning programme chevron_right

Milling of shoulders located deep

Oversized shoulder cutter options provide for optimal accessibility in milling shallow shoulders located deep. For those shoulders that are located at even larger depths, up to 3xDc use extensions with the Coromant Capto coupling, for longer assemblies, damper adaptors are the solution. Long edge cutters are also available in oversized versions to be used for deeper shoulders located deep. However, the radial depths of cut are more limited.

Application checklist and hints

General speaking these tip and hints are valid for all shoulder milling applications.

• Down-milling is always the first choice, and is especially important for shoulder milling due to the 90° entering angle
• Machining should be performed in a manner that directs the cutting forces towards the support points of the fixture insofar as this is possible. Up-milling can, therefore, be a favorable alternative in some cases
• Selection of cutter pitch is dependant on the stability of the entire system, including: the machine tool, workpiece and its clamping, as well as the workpiece material
• In ISO 40 machines and smaller, coarse-pitch cutters are recommended, due to limited stability
• Coarse-pitch cutters are also recommended for machining components mounted high up on a cube fixture
• The positioning of the cutter on the workpiece is extremely important and should receive extra attention
• When DC/ae >10, the feed, fz, should be adjusted in accordance with the hex value to achieve a good result and avoid edge breakdown
• If the shoulder depth is smaller than 75% of the cutting edge length, the quality of the vertical surface does not normally require extra finishing
• Choose a tougher carbide insert grade than for face milling
• If long edge cutters are used, the conditions are demanding, therefore, an even tougher grade may be required
• The deeper the cut, the more important it is to choose a lower cutting speed in order to avoid vibrations
• When vibrations occur, decrease vc and increase fz, check against the recommended hex value!
• Ensure that enough machine power is available for the chosen cutting data

Tool holding

• Pay special attention to power requirements when taking large cuts, particularly with long edge cutters
• Tool mounting has the greatest influence on the milling result for cutters smaller than 50 mm
• The larger the cutting depth, the more important the size and stability of the coupling become: since the radial forces are considerable when using shoulder face mills, particularly long edge milling cutters
• Coromant Capto couplings provide optimum stability and the smallest deflection for all types of cutters – particularly important with long or extended tooling

Rolling into cut

• Smooth entrances into the cut are essential for avoiding vibrations and extending tool life, particularly when milling shoulders
• Program the cutter to roll into cut; always generate a chip thickness on exit that is zero: together this will ensure both, higher feed and longer tool life
• This method is most suitable for applications in which you are milling around external corners, as it avoids sharp changes in the cut
• Keep the cutter engaged in a continuous cut

Milling of shoulders using side and face milling cutters

Side and face milling cutters are also used for milling shoulders, particularly if the configuration is narrow yet radially wide. These cutters are often the only possible solution for back-facing of hidden shoulders and faces.

Edging peripheral milling

What is successful edging peripheral milling?

Machining an edge is really a side milling operation applied in contouring tool passes. Side milling and edging are options of peripheral milling.

If you are looking for more details, kindly visit Square Shoulder Milling Cutter.

Choice of tools

• Thin edges are generally produced by end milling cutters, while deeper or thicker edges are generated by end mills using repeated “shoulder milling” passes, or by long edge cutters in a single pass
• Shoulders with depths of twice the diameter are effectively machined using long edge milling cutters or solid carbide cutters. For such deep shoulders, or thick component edges, a radial depth of cut of 0.5 times the diameter is recommended
• Side and face milling cutters can also be used for edging or peripheral milling
• A large helix ensures a sufficient number of teeth in cut and a smooth cutting action for edging at small radial cutting depths
• A close pitch or extra close pitch type of cutter is especially suitable for edging. This is also true when milling thinner edges or shallow ledge type shoulders using 90º end mills

How to apply

Surface texture – radially generated

When there is no run-out in the cutter, the height of the cusp, h,
will be equally high and can be calculated using the formula:
Profile depth / cusp height

When there is a run-out in the cutter, the feed per tooth, fz,
and consequently the height of the cusp, h, will vary depending on the TIR.

fzfz run-out

As mentioned, surface texture and climbing tendencies may limit the feed rate, especially when the radial depth of cut is small.

When using the side of an end mill to mill a profile, a series of ‘cusps’ are generated. The height of the cusp, - h, is determined by:

• Cutter diameter, DC
• Feed per tooth, fz
• Tool indicator reading of the run-out, TIR

Indexable insert cutters will always have a higher TIR than solid carbide cutters. Also, the larger the cutter diameter, the greater the number of teeth, which increases the distance between the high and low spots of the cusp.

For best surface finish:

• Use a solid carbide cutter
• Use a high precision power chuck with Coromant Capto coupling
• Use the shortest possible overhang

Feed recommendation (disregard hex):

• Indexable insert cutters, start value fz = 0.15 mm/tooth
• Solid carbide cutters, start value fz = 0.10 mm/tooth

Note: The worst surface quality is achieved if only one cutting edge generates the surface, due to bad run-out of the cutter.

Application checklist and hints

• A critical factor in peripheral milling is achieving a suitable feed per tooth, fz
• The feed value, fz, has to compensate for the cutter engagement, which influences the chip thickness
• Feed per tooth, fz, should be multiplied by the modification factor. This will give a higher feed rate with a smaller arc of engagement, and at the same time ensure that the chip thickness is large enough. However, the modification factor may not always be fully applicable: surface texture and climbing tendencies may limit the feed rate

Are you looking for tool recommendations?

Find our cutting tools here chevron_right

Need advice?

Ask us a question chevron_right

Want to learn more about the metal cutting basics?

Register for our free e-learning programme chevron_right

Related information

Face Milling Techniques

Discover techniques and tools for efficient face milling operations. chevron_right

Profile Milling

Profile milling involves multi-axis machining of complex convex and concave shapes. chevron_right

Successful Milling Techniques

This article explores key factors required for successful milling outcomes. chevron_right

Groove Slot Milling

Learn about groove and slot milling techniques and tool selection. chevron_right

Are you interested in learning more about Carbide Cutting Tools? Contact us today to secure an expert consultation!