The machine for grain grinding
Widely used in Flour Mill, Corn Mill, Feed Mill and so on.
Pingle are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Working principle
After the machine start up, the rollers begin to rotate. The distance of two rollers is wider. During this period, there is no material fed into the machine from inlet. When engaging, the slower roller moves to faster roller normally, meanwhile, the feeding mechanism begins to feed material. At this time, the related parts of feeding mechanism and roller gap adjusting mechanism begin to move. If the distance of two rollers is equal to working roller gap, two rollers engaged and begin to grind normally. When disengaging, the slower roller leaves from faster roller, meanwhile, the feeding roller stops feeding material. The feeding mechanism makes the material flow into the grinding chamber stably and spreads the material on the roller working width uniformly. The working state of feeding mechanism is in accord with the working state of roller, feeding material or stopping material can be controlled by the feeding mechanism. The feeding mechanism can adjust the feeding rate automatically according to the volume of feeding material.
Features
1) Roller is made of centrifugal cast iron, dynamically balanced for a long working span.
2) Horizontal roller configuration and servo-feeder contribute to a perfect grinding performance.
3) Air aspiration design for the roller gap help to reduce the temperature of the grinding roller.
4) Automatic operation system makes it possible to display or modify the parameter very simply.
5) All the roller mills can be central controlled (e.g. engaged/disengaged) through PLC system and in control room center.
Level Sensor: The level sensor is controlled by infrared. Sensitive flow control, accurate feeding of feed roller avoid the frequent engage and disengage of roller and extend the service life of the roller.
Roller: Double metal centrifugal casting, high strength, and good wear resistance. Unbalance of the dynamic balance ≤ 2g. Total radial run-out < 0.008 mm. The shaft end is treated with 40Cr and the hardness is HB248-286. The hardness of roller surface: Smooth roller is Hs62-68, tooth roller is Hs72-78. Besides, the hardness distribution is uniform, and the hardness difference of the roller is ≤ Hs4. Long service life.
Roller Gap Adjusting: Visible roll gap adjusting, easy operation
Transmission Spring Tensioning Mechanism: Transmission spring tensioning mechanism can ensure the synchronous wedge belt transmit stably with low noise and long service life
high quality six bin wheat flour mill plansifter price can also be used as check sifter and control sifter.
1.Easy and fast to change the sieves
2.With cleaners under the sieve to avoid blocking
3.All contact parts are food-grade.
Mini flour mill price in pakistan maize milling machine is the complete small unit corn milling plant. It mainly consists of seeds cleaning equipment, flour grinder, round sieve, fans and airlock. You can produce corn flour, corn grits and standard flour as you need.
The Wheat flour Mill Machinery of 10 tons per day compact wheat flour milling machinery are designed by AOHUA Machinery company. Which specially for grain wheat corn milling project.
1). High production capacity but with low energy consumption
2). Designed for producing high fineness of corn flour, flour size ranges from 40~100 mesh
3). Equipped with best importing grinding head and grinding rolls
4). Automatic and micro-computer control
5). It takes small space for install
1. wheat flour mill with high production capacity but with low energy.
2. Designed for producing high fineness of wheat flour, flour mesh size ranges from 40~160.
3. Equipped with best importing grinding head and grinding rolls.
4. Automatic and micro-computer control.
High quality grain mill roller grinding roller molybdenum nickel-chromium alloy roller flour mill roller is an important machine in wheat flour mill plant to control of grain, flour, feed and food like glutomatic system, falling number system, grain moisture meter and flour whiteness meter.
1.The material level is controlled by the level sensor plate
2.Total radial run-out < 0.008 mm.
Wheat flour mill wheat flour machine for soya flour In Argentina
This plant include wheat cleaing section, milling section and packing section.
Easy operation, low power consumption.
The raw material is wheat and the final product is super fine wheat flour for making bread, cake, biscuits and so on.
1. wheat flour mill with high production capacity but with low energy.
2. Designed for producing high fineness of wheat flour, flour mesh size ranges from 40~160.
3. Equipped with best importing grinding head and grinding rolls.
4. Automatic and micro-computer control.
The process of full set wheat flour milling machine can be roughly divided into 3 parts:
Cleaning part
To ensure the color and quality, grains should be firstly put into certain machines like Gravity Grading De-stonner, High and Square Shaking, Magnetic Separator, etc. to remove impurities like crushed stones and sands in it.
Milling part
To break the integrity of grain, reduce the ash content and grade milled flour, main part of flour making: Roller mill, Lying Grinder, Purifier, Sifting machine are indispensable.
Packing part
The packing machine can be manual as well as automatic, it can be designed as required.
wheat flour milling machine 50t/wheat cleaning machine wheat sifter machine
1.Easy operating, only 1 person can operate this plant.
2.High quality white flour widely used in food making.
3.It is suitable for supermarket &Bakery business.
4.Saving Power consumption &Lower Noise.
5.Once investment & Long term and stable profit return.
For more Wheat/Maize Pneumatic Roller Millinformation, please contact us. We will provide professional answers.
Farming Use Corn Maize Grinding Milling Machine Prices Animal Feed Grinder Wheat Flour Mill is especially suitable for the fresh investors in wheat processing industry. Which specially for grain wheat corn milling project.
1. Suitable for grain corn/maize flour line with different capacities.
2. Professional design technology and high quality equipment.
high quality wheat semolina gluten flour mill plant can produce super fine flour from 40 to 120 mesh, It is a new advanced control,easy to operate and high intelli-gence roller mill in which absorbs the advantages of international roller mills.
1. There are 4 parts, pre-cleaning equipment,cleaning equipment, milling equipment and auxiliary equipment.
2. Professional design technology and high quality equipment.
1. wheat flour mill with high production capacity but with low energy.
2. Designed for producing high fineness of wheat flour, flour mesh size ranges from 40~160.
3. Equipped with best importing grinding head and grinding rolls.
4. Automatic and micro-computer control.
Stainless steel wheat washers are commonly used key cleaning equipment in the grain processing industry, especially in flour mills.
1.Its main function is to deeply clean wheat and effectively remove contaminants such as dust, impurities, and pesticide residues adhering to the wheat surface.
2.It can accurately separate foreign objects like sand and stones from wheat based on the principle of specific gravity, ensuring that the wheat entering the milling process meets the cleanliness standards.
3.It can not only reduce the ash content and sand content of flour but also significantly improve the fineness and quality of flour.
maize flour mill machine wheat flour milling plant roller grinding machine 80-120mesh mixed flour milling machine is easy to operate and high intelligence roller mill in which absorbs the advantages of international roller mills. Complete set of wheat flour processing plant adopt various configuration modes for different choices.
1.Two floor design, whole line auto run.
2.The plant is fully automatic and allows for continuous working.
1. wheat flour mill with high production capacity but with low energy.
2. Designed for producing high fineness of wheat flour, flour mesh size ranges from 40~160.
3. Equipped with best importing grinding head and grinding rolls.
4. Automatic and micro-computer control.
• Cleaning part
To ensure the color and quality, grains should be firstly put into certain machines like Gravity Grading De-stonner, High and Square Shaking, Magnetic Separator, etc. to remove impurities like crushed stones and sands in it.
• Milling part
To reduce the ash content and grade the milled flour,complete the main part of flour making, equipments like: Roller mill, Lying Grinder, Purifier, Sifting machine are indispensable.
• Packing part
The packing machine can be manual as well as automatic, it can be designed as required.
Our products have been widely used in small and middle wheat mills and farms in many developing countries. This flour milling plant are especially suitable for the fresh investors in wheat processing industry.
1)The production capacity varies from 20MT to 150MT wheat per day, can be design according to customer’s requirements.
2) Low capital investment and low power consumption
3)Our reliable and productive machines coupled with excellent design can bring you high quality flour and high yield.
4)Wheat storage silos and flour and bran warehouse are not included in the above solutions.
Wheat Flour Mill Corn Flour Mill corn mill grinder is used for grinding the rice, corn, beans, wheat to flour or granule. The Screen mesh can be customized.
1. It is best to control the moisture content of wheat within 13%.
2. Two floor design, whole line auto run.
wheat flour mill plant use plansifter is designed with compact structure, the single case plansifter widely applied to Wheat/Corn/Grain processing plant.
1.Common type and closed type for customers to choose
2.Wooden double-sided plastic screen, 6-12 layers mounted according to different screening requirements
3.The screen is pressed vertically and horizontally to ensure that the screen is not loose and does not cause leakage
4.Reasonable rotation speed and rotary diameter parameter configuration
5.Glass steel suspender installed, smooth operation, less swimming time when start or stop the machine
6.Safety wire rope ensures safety and easy leveling
7.Small area, flexible usage
8.Advanced design, high quality material selection
9.Anti-static spraying treatment
1. wheat flour mill with high production capacity but with low energy.
2. Designed for producing high fineness of wheat flour, flour mesh size ranges from 40~160.
3. Equipped with best importing grinding head and grinding rolls.
4. Automatic and micro-computer control.
The process of flour making can be roughly divided into 3 sections:
Cleaning Section
To ensure the color and quality, grains should be firstly put into certain machines like vibrating
screen, gravity grading destonner, magnetic separator, etc. to remove impurities like crushed
stones and sands in it.
Milling Section
To break the integrity of grain, reduce the ash content and grade milled flour into different size,
complete the main part of grain making, roller mill, Lying grinder, high and square shaking, purifier,
sifting machine are indispensable.
Packaging section
The packing machine can be designed into manual or automatic as required.
flour milling plansifter for flour checking sifter designed with multi layers sieves, the plansifter grades, screens and sizes the mixing materials and gets the fine flour at the end of the flow.
1) The adjustable counterweight is mounted with famous brand bearings.
2) Our twin-section plansifter comes with two sections, so its production capacity is higher. It has small size, light weight.
3) The sieves pack is suspended by its own frame which is installed on the floor or suspended by a separated frame fixed on the ceiling.
China AOHUA Machinery Wheat Flour Mill Machine Factory Price is mainly designed according to the hard white wheat. Which include Cleaning Section to Milling Section to Flour sifting section to Packing Section with Electric controlling system, it is more automaticlly design.
Brand New Wholesale square plansifter for Wheat Flour Sifter used in flour mil rice mill and maize mill:
1). It is a kind of practical flour milling equipment, widely used for flour milling section.
2). Sieve frame quantity can be changed to get different sieving performance according to needs.
3) The adjustable counterweight is mounted with famous brand bearings.
4) Our twin-section plansifter comes with two sections, so its production capacity is higher. It has small size, light weight.
If you want to learn more, please visit our website Pingle Group Wheat Flour Milling Machine.