BOPP ordinary film (flat film, light film) is suitable for printing and compounding of food packaging, paper compounding and general packaging. It is the most widely used variety in BOPP products. It is widely used in all kinds of printing and compounding products for packaging of various foods and articles. In the consumption of optical film, tape film occupies a large proportion, and its production characteristics are large output, simple process and low technical requirements.
2. BOPP thermal sealing film is divided into two kinds: one-sided thermal sealing film and two-sided thermal sealing film. It is a polypropylene thermal sealing film (BOPP thermal sealing film) made by biaxial stretching of heat sealing masterbatch on the surface. It is mainly used in the thermal sealing packaging of food, medicine and electrical components. BOPP heat sealing film is not only hot sealing, but also printable. It is mainly used in composite, printing, bag making and other industries.
Name
Cold Lamination Film
Material
Cpp film Opp film (Matte film /Gloss film )
Application
Advertising, outdoor signage display and decoration purpose
Thickness
Thickness : 18mic .26mic .40mic .
Wide
Custom required
Length
400m/1000m/roll
Type
Light surface/bright surface (transparent), dumb surface
Color
Transparent /Clear , Matte ,Gloss
Printed
Printing accuracy: 1200dpi
Delivery Time
Depends on the quantity, usually 5-15 days after deposit received
What's the difference between a hot laminating film and a cold laminating film?
The adhesive on a "hot" laminating film activates when the printed graphic is run through a hot-roll laminator at temperatures between 210 and 240 degrees. Because these high levels of heat can damage some types of inkjet graphics, "low-melt" or "heat-assist" films are also used. "Low melt" films have heat-activated adhesives that can applied at 185 to 195 degrees. "Heat assist" films have pressure-sensitive adhesives (PSAs) and liners and are applied with hot-roll laminators at 185 to 195 degrees.
"Cold" laminating films have a more aggressive adhesive that can be applied with pressure, instead of heat. A release liner protects the adhesive until it ready to applied, typically on a cold-roll laminator. Cold laminating films typically cost more than hot laminating films, but they can be applied using less costly, easier-to-operate non-heated laminators.
Cold roll laminators are also used for laying down adhesive films in the sign-making industry, for example mounting a large print onto a board. A practiced operator can apply a large adhesive sheet in a fraction of the time it takes to do so by hand.
Application
Production Process
About our company
Why choose us
1.We have a complete quality inspection system.
Excellent testing equipment
Professional testing team
quality control during whole production process
2.Our factory has Strictly control the source of raw materials,stable and reliable raw material supplier.
Independent quality department
Stable and reliable raw material supplier
3.Our company has an experienced team of experts. Can guarantee the customer's pre-sales service
Packing and Delivery:
PE FILM INSIDE + KRAFT OUTSIDE+PALLET
Our company adopts the protection angle of the paper shell imported from Taiwan, which can ensure the integrity of the goods to the maximum extent in the transportation process.
Paper tube Core:76MM
Paper tube thickness: 10mm
Paper tube port: No burrs and shredded paper are allowed. It is not allowed to stick with tape. Both ends of the paper tube are flush with the product.
Why we cared lot about packing:
We stipulate that the export packaging must use bullskin paper + PE film, the appearance of packaging tape, and the use of anti-folding packaging to minimize the impact damage of products in transit, and increase the annual packaging cost of nearly 200,000 yuan.
FAQ:
Q1:Could I have prices of your products?
A1:Welcome. Pls feel free to send us an email here. You will get our reply in 24 hours
Q2:Can we print our logo/website/company name on products?
A2:Yes, please advise the size and Pantone Code of the logo.
Q3:What's the lead time for regular order?
A3:10-21 days for order quantity lower than 50000KGS; For more quantity, usually 30 days.
Q4:Can I get a discount?
A4:Yes, for the order quantity more than 500 pcs, please contact us to get the best price.
Q5:Do you inspect the finished products?
A5:Yes, each step of production and finished products will be came out inspection by QC department before s
Contact
Want more information on What is transparent Bopp film?? Click the link below to contact us.