INDUSTRIAL MANUFACTURING BLOG YOU SHOULD BE READING

10 Key Questions to Ask When Choosing an Air Compressor - Sollant

23 Jun.,2025

10 Key Questions to Ask When Choosing an Air Compressor - Sollant

Verifying that you are not a robot...

Inline Filter Questions | Apnea Board

Jake B

Posts: 28
Threads: 5
Joined: Mar

Machine: ResMed AirCurve 10 VAuto BiPAP
Mask Type: Full face mask
Mask Make & Model: ResMed AirTouch F20
Humidifier: ResMed
CPAP Pressure: 15i/10e
CPAP Software: OSCAR

Other Comments:

Sex: Male
Location: Tennessee

Link to NAILI

Inline Filter Questions Hello all,
I've recently been trying to use an inline filter to hopefully cut down on some allergy symptoms. I believe my dust mite allergies could be causing my issues and/or contributing to sleep problems. But that's a story for another day.

So I installed the bulb filter between the machine and the hose as you're supposed to do however when I put my mask on, I can hear a whistling sound coming from I believe the mask or hose. It's worse when I lay on my side, because I'm guessing the whistling sort of echoes off my pillow and seems louder.

I found on another site where it's possible to install the filter an alternate way - between the hose and the mask. I've not had any issues wearing it this way but this poses another question. Most filters (home A/C, car engine, etc.) are meant to be installed to where the air flows one direction, which seems to be the same with these filters (see attached)

According to this graphic, if I connect to the actual hose and mask like I'm doing, the filter is technically backwards of how it should be. Is this going to be an issue? Are there any solutions to make it not whistle when it's installed the 'right' way? Any assistance is appreciated.

Note- this is not meant to be a debate whether or not I should use this type of filter. I know some people are against them, however I am trying them to see if they work for me. Thanks!

Edit- for some reason it's not allowing me to attach the photo of the airflow direction, so here is the link
[Commercial Link Removed] Search amazon for Nispira line Outlet Bacteria Filter

-----
Moderator Action: Commercial Link Removed
To maintain our status as an educational organization, the only commercial links allowed in this forum are to CPAP-related manufacturer websites. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
----- Jake B

Posts: 28
Threads: 5
Joined: Mar

RE: Inline Filter Questions Trying to attach photo

Attached Files Thumbnail(s)

Sleeprider
Wiki Editor

Posts: 29,366
Threads: 90
Joined: Dec

Machine: Resmed Aircurve 10 VAuto
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10 and P30i
Humidifier: Resmed Climateline
CPAP Pressure: Vauto 9.6-18, PS 4.4
CPAP Software: ResScan OSCAR

Other Comments: गुरु

Sex: Male
Location: Florida

RE: Inline Filter Questions Remember to use the setting for an inline antibacterial filter on your machine settings. Keep an eye on the filter as they exist in a humid environment and need to be changed if you see any contamination. Consider adding Flonase to your therapy regimen. It might work wonders. Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT. DaveL

Posts: 2,522
Threads: 38
Joined: Apr

Machine: S10 Autoset For Her (Aug 27, )
Mask Type: Nasal mask
Mask Make & Model: ResMed N20 preferred, P30i, F&P Evora Full leaks
Humidifier: ResMed S10 Autoset "for her"
CPAP Pressure: 13.4.....19
CPAP Software: OSCAR myAir

Other Comments: If I have to use all this stuff, treatment better work!

Sex: Male
Location: Canada/Toronto

RE: Inline Filter Questions

(02-14-, 11:48 AM)Jake B Wrote: Trying to attach photo

Jake the airflow arrows should be in the same direction...from the cpap machine to the filter to the mask.

I've seen all kinds of screw ups with air filters in air handling units. I'm an old mechanical engineer...

for instance, no filter; filters completely plugged; filters with blow by because they are built wrong. Noise problems because replacement filters weren't built right. Filters that weren't assembled right by the manufacturer.

I have a question....is there a highly efficient ResMed filter that would fit in the cpap machine inlet? That would be quieter.... DaveL
compliant for 35 years /// Still trying!

I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea.

http://www.apneaboard.com/wiki/index.php..._The_Guide

Jake B

Posts: 28
Threads: 5
Joined: Mar

If you want to learn more, please visit our website inline compressed air filter.

RE: Inline Filter Questions

(02-14-, 10:41 PM)DaveL Wrote:
(02-14-, 11:48 AM)Jake B Wrote: Trying to attach photo

Jake the airflow arrows should be in the same direction...from the cpap machine to the filter to the mask.

That is the 'correct' way to use these apparently. Machine to filter to hose to mask.

But the way I have mine installed (attached to the mask end), the filter has to be reversed due to the fittings on each end so the airflow is technically backwards:

Machine -> Hose -> Filter -> Mask

So my concern was how effective it would be using it like this. I don't seem to be having much issue so far, so we will see.

Hopefully all this makes sense, it's hard to explain without having something to show visually. DaveL

Posts: 2,522
Threads: 38
Joined: Apr

RE: Inline Filter Questions Going back to drafting board days...a long time ago...

The transition is shown properly...it's shorter and steeper on the inlet side of the filter. It's longer and shallower on the discharge side. The filter is shown properly.

If you've reversed the filter, it's in backwards and may be the cause of the noise. Way back I used to design HVAC for schools, hospital and industry.

However, I wouldn't use a filter like that. I don't know how it's made inside. and the air velocity and velocity pressure are high.

I'd rather use a high grade filter on the inlet to the cpap where the velocity is lower. I have standard ResMed filters. If a higher grade filter is available, I'll change. I plan to check with my DME. DaveL
compliant for 35 years /// Still trying!

I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea.

http://www.apneaboard.com/wiki/index.php..._The_Guide

SarcasticDave94

Posts: 15,562
Threads: 22
Joined: Mar

Machine: None again
Mask Type: Not using mask
Mask Make & Model: None
Humidifier: None
CPAP Pressure: 0/0
CPAP Software: Not using software

Other Comments: SCS PVC K9D** Untreated CA COPD/Asthma

Sex: Male
Location: Nowhere near Normal IL, US, probably in PA drinking coffee

RE: Inline Filter Questions Given that these are directional, I'd say it's not working well enough to bother with if you can't install it with right airflow direction in mind. If I'm not mistaken, these AB filters are expected to be near the machine outlet. Example on an NIV the AB filter is on the machine outlet. That placement otherwise that is intentional on your part, but I think the filter project overall here is a bust. I think it's asking for some trouble to reverse flow this filter intentional. Mask Primer

Positional Apnea

Attach OSCAR, etc.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT. DaveL

Posts: 2,522
Threads: 38
Joined: Apr

RE: Inline Filter Questions

(02-15-, 12:39 PM)SarcasticDave94 Wrote: Given that these are directional, I'd say it's not working well enough to bother with if you can't install it with right airflow direction in mind. If I'm not mistaken, these AB filters are expected to be near the machine outlet. Example on an NIV the AB filter is on the machine outlet. That placement otherwise that is intentional on your part, but I think the filter project overall here is a bust. I think it's asking for some trouble to reverse flow this filter intentional.

Thanks.

You've stated it better than I could.

DaveL DaveL
compliant for 35 years /// Still trying!

I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea.

http://www.apneaboard.com/wiki/index.php..._The_Guide

SarcasticDave94

Posts: 15,562
Threads: 22
Joined: Mar

RE: Inline Filter Questions Just doing my part to make the name Dave look awesome. Mask Primer

Positional Apnea

Attach OSCAR, etc.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT. DaveL

Posts: 2,522
Threads: 38
Joined: Apr

For more hydraulic driven air compressorsinformation, please contact us. We will provide professional answers.

RE: Inline Filter Questions You dun good. ;-)

I'm still working as an engineer. Getting new schools built at about $12M a pop.

DaveL DaveL
compliant for 35 years /// Still trying!

I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea.

http://www.apneaboard.com/wiki/index.php..._The_Guide

Previous: Can You Freeze Sausage Casings? - Steve's Cooking Your Catch

Next: 5 Key Factors To Consider When Choosing The Right Air ...

Guest Posts